P115 Malerweiss HD: Interior Wall Paint for Everyday Use

Finish: Dull matt Binder: Polyvinyl acetate dispersion Use: Interior Wet abrasion: Class 2

PROFITEC P115 Malerweiss HD is a reliable interior wall paint developed for straightforward everyday use in living and working areas. Designed for new and renovation coatings with medium surface stress, it offers easy application, predictable behaviour and consistent results across a wide range of common interior substrates.

The interior wall paint is suitable for typical residential and commercial interiors where efficiency, ease of use and a uniform matt finish are required. Malerweiss HD performs particularly well on wallpapers and mixed substrates, making it a dependable choice for everyday interior projects without specialist application demands.

Interior Paint Properties

• Interior wall paint for reliable everyday use
• Very easy processing with predictable results
• Good coverage for efficient new and renovation coatings
• Ideal for non-woven, fabric, plaster and woodchip wallpapers
• Diffusible coating structure
• Emission minimised, solvent free and plasticiser free
• Low odour and water dilutable
• Free from fogging active substances

Recommended Applications & Substrates

• Interior walls and ceilings in residential and commercial buildings
• Living and working areas with medium surface stress
• Everyday renovation and new interior coatings
• Mineral plasters of mortar groups P II and P III
• Gypsum plasters of mortar group P IV
• Concrete and fibre cement boards
• Gypsum plasterboards
• Glass fabrics, glass and cellulose fleeces
• Woodchip, textured and paper wallpapers
• Recoating of sound existing dispersion-based coatings

Application Method & Coverage

• Apply by brush, roller or spray application
• Roller application recommended with approx. 12 mm pile height
• Airless spraying possible, spray angle 50°, nozzle 0.018" to 0.021", pressure 120 to 180 bar
• Apply wet on wet to avoid visible joints
• One coat often sufficient for recoating on low contrast substrates
• Dilution with max. 10 percent water
• Consumption approx. 145 ml/m² per coat on smooth, slightly absorbent substrates
• Recommended application temperature at least +5 °C
• Overcoatable after approx. 4 hours at +20 °C and 65 percent relative humidity

Interior Paint Specifications

• Binder: Polyvinyl acetate dispersion
• Pigment type: Titanium dioxide
• Finish: Dull matt
• Wet abrasion: Class 2
• Hiding power: Class 1
• Water vapour permeability: Class V1, high
• Density: Approx. 1.49 g/cm³
• VOC content: < 1 g/l

Important: On visually connected surfaces, use only material from the same production batch. A test application is recommended before full-scale application, especially on mixed substrates.