P144 Matt Plus: Interior Wall Paint for Flawless Surfaces

Finish: Dull matt Binder: Polyvinyl acetate dispersion Use: Interior Wet abrasion: Class 1

PROFITEC P144 Matt Plus is a professional interior wall paint developed for achieving uniform, flawless surfaces under demanding lighting conditions such as strong grazing light. Its exceptionally long open time and optimised flow properties allow smooth application without build-up, minimising lap marks and visible joints on large, contiguous wall areas.

The interior wall paint is suitable for both renovation and new coatings in living and working areas with increased surface stress. Matt Plus is particularly valued for its forgiving application behaviour, excellent repair characteristics and reliable finish quality, making it an ideal choice for modern interiors, corridors, offices and other spaces where surface appearance is critical.

Interior Paint Properties

• Interior wall paint designed for flawless finishes in strong grazing light
• Very long open time for uniform application on large surfaces
• Processing without build-up, even on contiguous wall areas
• Excellent repair characteristics
• Tested resistance to aqueous disinfectants
• Diffusible coating structure
• Emission minimised, solvent free and plasticiser free
• Low odour and water dilutable
• Free from fogging active substances

Recommended Applications & Substrates

• Interior walls and ceilings in residential and commercial buildings
• Living and working areas with increased surface stress
• Large wall surfaces with critical or directional lighting
• Mineral plasters of mortar groups P II and P III
• Gypsum plasters of mortar group P IV
• Concrete and fibre cement boards
• Gypsum plasterboards
• Glass fabrics, glass and cellulose fleeces
• Woodchip, textured and paper wallpapers
• Recoating of sound existing dispersion-based coatings

Application Method & Coverage

• Apply by brush, roller or spray application
• Roller application recommended with approx. 12 mm pile height
• Airless spraying possible, spray angle 50°, nozzle 0.018" to 0.021", pressure 120 to 180 bar
• Apply wet on wet to avoid visible joints and surface texture differences
• One coat often sufficient for recoating on low-contrast substrates
• Two coats recommended for optimum results under strong grazing light
• Dilution with max. 5 percent water
• Consumption approx. 165 ml/m² per coat on smooth, slightly absorbent substrates
• Recommended application temperature at least +5 °C
• Overcoatable after approx. 4 hours at +20 °C and 65 percent relative humidity

Interior Paint Specifications

• Binder: Polyvinyl acetate dispersion
• Finish: Dull matt
• Wet abrasion: Class 1
• Hiding power: Class 1
• Water vapour permeability: Class V1, high
• Density: Approx. 1.49 g/cm³
• VOC content: < 1 g/l

Important: On visually connected surfaces, use only material from the same production batch. Repairs may be more or less visible depending on substrate and lighting conditions. A test application is recommended before full-scale application.