P120 Superweiss: Interior Wall Paint with High Hiding Power

Finish: Dull matt Binder: Acrylic dispersion Use: Interior Wet abrasion: Class 1

PROFITEC P120 Superweiss is a high performance interior wall paint developed for maximum hiding power and reliable surface coverage. Designed for renovation and new coatings in areas with increased stress, the paint delivers a uniform, structure-preserving matt finish with consistently high opacity.

The interior wall paint is suitable for a wide range of indoor substrates and is used wherever strong coverage, even results and dependable processing are required. Superweiss is particularly appropriate for projects where substrate contrast needs to be reliably covered while maintaining a consistent surface appearance across larger areas.

Interior Paint Properties

• Interior wall paint for reliable coverage on contrasting substrates
• Uniform surface appearance with structure-preserving dull matt finish
• Excellent workmanship
• Tested resistance to aqueous disinfectants
• Diffusible coating structure
• Emission minimised, solvent free and plasticiser free
• Low odour and water dilutable
• Free from fogging active substances

Recommended Applications & Substrates

• Interior walls and ceilings in residential and commercial buildings
• Living and working areas with increased surface stress
• Renovation and new interior coatings
• Plasters of mortar groups P II and P III
• Gypsum plasters of mortar group P IV
• Concrete and fibre cement boards
• Gypsum plasterboard
• Glass fabric and cellulose fleeces
• Woodchip wallpaper
• Textured wallpapers made of vinyl foam or paper
• Overcoating of sound existing dispersion-based coatings

Application Method & Coverage

• Apply by brush, roller or spray application
• Roller application recommended with approx. 12 mm pile height
• Airless spraying possible, spray angle 50°, nozzle 0.018" to 0.021", pressure 120 to 180 bar
• Apply wet on wet to achieve even coverage
• One coat often sufficient for recoating on low contrast substrates
• Two coats recommended on high contrast substrates
• Dilution with max. 10 percent water
• Consumption approx. 125 ml/m² per coat on smooth, slightly absorbent substrates
• Recommended application temperature at least +5 °C
• Overcoatable after approx. 4 hours at +20 °C and 65 percent relative humidity

Interior Paint Specifications

• Binder: Acrylic dispersion
• Finish: Dull matt
• Wet abrasion: Class 1
• Hiding power: Class 1
• Yield: Approx. 8 m²/l
• Water vapour permeability (sd): Approx. 0.10 m
• Density: Approx. 1.54 g/cm³
• VOC content: < 1 g/l

Important: On visually connected surfaces, use only material from the same production batch. A test application is recommended before full-scale application, particularly on high contrast substrates.