P118 Rapidweiss: Fast-Covering Interior Wall Paint

Finish: Dull matt Binder: Polyvinyl acetate dispersion Use: Interior Wet abrasion: Class 2

PROFITEC P118 Rapidweiss is a single-layer interior wall paint developed for fast and efficient renovation and new coatings in living and working areas subject to increased stress. The paint is designed to deliver reliable coverage, uniform surface results and excellent workmanship across a wide range of interior applications.

The interior wall paint is suitable for situations where time-efficient application, dependable opacity and consistent surface quality are required. Rapidweiss is intended as an all-purpose interior paint for professional use on common interior substrates, including recoating of sound existing dispersion-based coatings.

Interior Paint Properties

• Single-layer interior wall paint for efficient application
• Uniform, even surface finish
• First-class workmanship
• Ideal for a wide range of interior applications
• Diffusible coating structure
• Emission minimised, solvent free and plasticiser free
• Water dilutable and low odour
• Free from fogging active substances

Recommended Applications & Substrates

• Interior walls and ceilings in residential and working areas
• Areas subject to increased mechanical stress
• Renovation and new interior coatings
• Plasters of mortar groups P II and P III
• Gypsum plasters of mortar group P IV
• Concrete and fibre cement boards
• Gypsum plasterboards
• Glass fabrics and cellulose fleeces
• Woodchip wallpaper
• Textured or paper wallpapers
• Recoating of intact old dispersion-based coatings

Application Method & Coverage

• Apply by brush, roller or spray application
• Roller application recommended with approx. 12 mm pile height
• Airless spraying possible, spray angle 50°, nozzle 0.018"–0.021", pressure 120–180 bar
• Apply wet on wet to avoid visible joints
• Single coat often sufficient on substrates without strong colour contrast
• Dilution with max. 10 percent water
• Consumption approx. 125 ml/m² per coat on smooth, slightly absorbent substrates
• Recommended application temperature at least +5 °C
• Overcoatable after approx. 4 hours at +20 °C and 65 percent relative humidity

Interior Paint Specifications

• Binder: Polyvinyl acetate dispersion
• Finish: Dull matt
• Wet abrasion: Class 2
• Hiding power: Class 1
• Yield: Approx. 8 m²/l
• Water vapour permeability: Class V1, high
• Density: Approx. 1.45 g/cm³
• VOC content: < 1 g/l

Important: On visually connected surfaces, use only material from the same production batch. A test application is recommended before full-scale application, particularly on high contrast substrates.