P154 Samtlatex 10: Low-VOC Silk-Matt Interior Latex Paint

Finish: Silk matt Binder: Polyvinyl acetate dispersion Use: Interior Wet abrasion: Class 1

PROFITEC P154 Samtlatex 10 is a silk-matt interior wall paint developed for renovation and new coatings in living and working areas subject to increased surface stress. The coating combines a structure-preserving finish with even flow and easy cleaning, making it suitable for interiors with higher functional demands.

The interior wall paint is designed for applications where durability, cleanability and a uniform surface appearance are required. Samtlatex 10 offers reliable performance on a wide range of interior substrates and is suitable for both residential and commercial environments with increased wear.

Interior Paint Properties

• Structure-preserving silk-matt interior wall paint
• Easy to clean surface finish
• Even flow for uniform results
• Tested resistance to aqueous disinfectants
• Diffusible coating structure
• Emission minimised, solvent free and plasticiser free
• Water dilutable and low odour
• Free from fogging-active substances

Recommended Applications & Substrates

• Interior walls and ceilings in residential and working areas
• Areas subject to increased mechanical stress
• Renovation and new interior coatings
• Plasters of mortar groups P II and P III
• Gypsum plasters of mortar group P IV
• Concrete and fibre cement boards
• Gypsum plasterboards
• Glass fabric and cellulose fleeces
• Woodchip wallpaper
• Textured or paper wallpapers
• Overcoating of intact old dispersion-based paints

Application Method & Coverage

• Apply by brush, roller or spray application
• Roller application recommended with approx. 12 mm pile height
• Airless spraying possible, spray angle 50°, nozzle 0.018"–0.021", pressure 120–180 bar
• Apply wet on wet to avoid build-up
• One coat often sufficient for recoating on low contrast substrates
• Dilution with max. 10 percent water
• Consumption approx. 145 ml/m² per coat on smooth, slightly absorbent substrates
• Recommended application temperature at least +5 °C
• Overcoatable after approx. 4 hours at +20 °C and 65 percent relative humidity

Interior Paint Specifications

• Binder: Polyvinyl acetate dispersion
• Finish: Silk matt
• Wet abrasion: Class 1
• Hiding power: Class 2
• Yield: Approx. 7 m²/l
• Water vapour permeability: Class V2 (medium)
• Density: Approx. 1.33 g/cm³
• VOC content: < 1 g/l

Important: On visually connected surfaces, use only material from the same production batch. A test application is recommended before full-scale application.